Factory and warehouse ductwork cleaned by NADCA-certified crews
Industrial Air Duct Cleaning in Ogden
Industrial Air Duct Cleaning in Ogden keeps production floors running with cleaner air and lower blower load. We handle factory air duct cleaning in Ogden for plants, warehouses, and shops across Weber County, from 20,000 sq ft assembly bays to 4,000 sq ft machine shops. If your ductwork has not been opened in years, we start with a video inspection camera and show you exactly what is inside before we quote the job.
Live phone supportUpfront optionsBacked workmanship
What's included
What Is Included in Industrial Air Duct Cleaning
Every industrial job includes camera inspection, mechanical cleaning, HEPA filtration, sanitizing, and a written report. Add-ons like coil cleaning and duct repair are quoted separately after the inspection, so you only pay for what your system actually needs.
Video Camera Inspection
We run a video inspection camera through every main trunk and branch line before cleaning. You see the footage on-site. This is how we determine dust depth, debris type, and whether rodent infestation in ductwork or mold growth in ducts is present.
Mechanical Duct Cleaning
Rotary brush, duct brush system, air whip, and compressed air nozzle break loose and push out debris. A negative air machine with HEPA filters holds the system under negative pressure. No dust escapes into your production space.
Sanitizing Fog Treatment
After debris removal, we fog the duct interior with sanitizing solution. This knocks down mold spores, bacteria, and musty odors. It is safe for occupied buildings and dries within an hour, so your next shift is not affected.
Access Panel Installation
We cut and frame access panels every 10 to 20 feet on trunk lines. Panels are gasketed and sealed with duct sealant. This makes every section reachable for the next cleaning and eliminates the need to cut into ductwork again.
Written Cleaning Report
You get before-and-after photos, airflow readings, static pressure measurements, and a signed report keyed to NADCA standards. This packet is formatted for insurance auditors, OSHA inspectors, and corporate maintenance records.
Service overview
What Industrial Air Duct Cleaning in Ogden Actually Involves
Industrial Air Duct Cleaning in Ogden is the mechanical removal of dust, metal fines, weld smoke residue, and biological growth from large commercial duct systems, followed by HEPA filtration and source capture. It is not a shop-vac pass over the registers. We open access panels every 10 to 20 feet, run a duct brush system and air whip through the trunk lines, and pull everything back to a negative air machine fitted with HEPA filters so nothing re-enters your production space.
Most Ogden plants call us because something measurable changed: a compressor running hotter, a spray booth pulling weak, or a crew complaining about headaches by 2 p.m. If you are searching for industrial air duct cleaning near me Ogden UT, the answer usually starts with a camera inspection. We document duct condition with photos, measure static pressure at the main trunk, and hand you a written scope before any equipment rolls in.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How Our Industrial Duct Cleaning Process Runs
The process flexes to the condition, but these checkpoints keep decisions clear.
Walkthrough and Camera Inspection
We walk the plant with your maintenance lead, map every trunk and branch, and run a video inspection camera through the main runs. You see the footage. We note dust depth, debris type, and any rodent infestation in ductwork or damaged flexible duct before quoting.
Access Panel Cutting
We cut and frame access panels every 10 to 20 feet on trunk lines so every section is reachable. Panels get gasketed register covers or hinged doors, sealed with duct sealant. No duct is left inaccessible for the next cleaning.
Mechanical Cleaning
A rotary brush and duct brush system break loose caked dust while an air whip and compressed air nozzle push debris downstream. A negative air machine with HEPA filters holds the system under negative pressure so nothing escapes into your production area.
Sanitizing and Sealing
After debris removal, we fog the duct interior with sanitizing solution to knock down mold growth in ducts and musty odors. Loose seams and damaged insulation get duct sealant and repair. Coil cleaner is applied to any evaporator coil we expose.
Verification and Report
We re-run the camera, take airflow readings at the main trunk, and photograph each section. You get a signed report with before-and-after images, static pressure numbers, and a recommended next-clean interval. Most plants schedule the next one at 24 to 36 months.
Tools & methods
Equipment and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
HEPA Vacuum
Captures fine dust and metal fines at the source. We use Vacmaster and Pullman-Holt HEPA units rated for industrial particulate loads, so nothing escapes into your production space.
Negative Air Machine
Holds the duct system under negative pressure during cleaning. Abatement Technologies units with HEPA filtration keep your plant air clean while we work inside the ducts.
Duct Brush System
Rotary brushes and flexible shafts break loose caked dust from sheet metal and flexible duct. We size the brush to the duct diameter, from 6-inch branches to 24-inch trunks.
Air Whip
Compressed air nozzles on a rotating head scour duct walls and push debris downstream to the vacuum. Effective on irregular shapes where brushes cannot reach.
Video Inspection Camera
Documents duct condition before and after cleaning. We show you the footage on-site so you see exactly what is inside your system.
Sanitizing Fogger
Applies sanitizing solution as a fine mist that coats duct interior surfaces. Knocks down mold spores, bacteria, and odors without leaving residue that affects production.
Use cases
When Ogden Facilities Call Us
These examples show how the service framework adapts rather than forcing every call through one repair.
Packaging Plant With Mold Issue
A roof leak had saturated flexible duct above the packaging line. Video inspection showed visible mold growth and musty odors were noticeable in the break room. An internal audit flagged the issue. → We removed contaminated flexible duct, cleaned the sheet metal trunk with a duct brush system, and fogged the system with sanitizing solution. Follow-up camera inspection showed clean surfaces. The plant passed its audit.
Warehouse With Rodent Infestation
Nests and droppings were found in the return duct above the loading dock. Airflow was restricted, and the smell was spreading through the office area. Insurance auditor flagged it as an unresolved contamination event. → We removed nesting material, sanitized the duct interior, and sealed entry points with sheet metal and duct sealant. Airflow returned to spec, and the auditor signed off on the documentation.
Problems we solve
Industrial Duct Problems We Solve in Ogden
Most industrial duct issues show up as airflow problems, air quality complaints, or failed inspections. Here is what we fix.
Heavy dust buildup choking trunk lines
We run a rotary brush and air whip through every trunk line, pulling debris back to a HEPA-filtered negative air machine. After cleaning, we measure static pressure and confirm airflow is back within spec. Most Ogden plants see measurable amp draw reduction on their air handlers.
Mold growth in ducts after roof leaks
We remove contaminated debris, apply sanitizing solution with a fogger, and seal any compromised duct sections. If flexible duct is saturated, we replace it. The system is documented as clean before we leave, with photos for your records.
Rodent infestation in ductwork
We remove nesting material and debris, sanitize the duct interior, and seal entry points with sheet metal and duct sealant. We also identify where rodents are getting in so your maintenance team can address the building envelope.
Construction debris left in new ductwork
We perform a full post-construction duct cleaning, pulling debris from every branch run and trunk line. Coils are cleaned with coil cleaner, and filters are replaced with HEPA filters. The system is verified clean before occupancy.
Pricing process
What Industrial Duct Cleaning Costs
$2,500 - $18,000 depending on scope
Square Footage
Larger facilities have more ductwork and take longer to clean. A 10,000 sq ft shop might take one shift; a 60,000 sq ft plant can take two or three. Square footage is the biggest driver of cost.
Duct Accessibility
Ductwork hidden behind walls or above fixed equipment takes longer to reach. We cut access panels where needed, but if the system requires extensive panel work, that adds labor. We flag this during the walkthrough.
Contamination Level
Light dust is a straightforward cleaning. Heavy weld smoke residue, mold growth, or rodent infestation requires additional sanitizing and possibly duct replacement. The camera inspection tells us which category your system falls into.
How much does industrial air duct cleaning cost in Ogden UT?
Most industrial jobs in Ogden run $2,500 to $18,000 depending on square footage, duct accessibility, and contamination level. A 10,000 sq ft shop with straightforward trunk lines typically lands near the low end. A 60,000 sq ft plant with vertical drops and heavy weld smoke residue runs higher. We quote after the camera inspection, so the number you get is the number you pay.
Do you offer factory air duct cleaning after hours in Ogden Utah?
Yes. We schedule factory air duct cleaning Ogden jobs on second shift, overnight, and weekends so your production line keeps running. Our crews bring their own lighting and negative air equipment. Most after-hours jobs run six to ten hours and wrap before the morning shift starts. There is no premium for night work on jobs over 20,000 sq ft.
How often should industrial ducts be cleaned in Ogden UT?
Most Ogden plants should clean trunk lines every 24 to 36 months. Facilities with welding, woodworking, or powder coating need it every 12 to 18 months because metal fines and smoke residue build faster. We recommend based on your dust depth readings and static pressure trends, not a flat calendar. If your blower amps climb 10 percent, that is your signal.
Are you certified for industrial air duct cleaning in Ogden?
Yes. Our technicians hold NADCA Air Systems Cleaning Specialist (ASCS) certification, and our lead inspector carries NADCA Certified Ventilation Inspector (CVI) credentials. We are registered with Utah DOPL, carry EPA Lead-Safe Certification, and maintain OSHA 10 training on all field staff. Our work follows NADCA ACR standards, and we provide the documentation to prove it.
Related services
Related Services
Air Duct Cleaning Near Me
If you are searching for air duct cleaning near me in Ogden, we cover both residential and industrial systems. For plants, this means the same crew that handles your factory ductwork can service office areas and break rooms on the same visit.
24/7 Air Duct Cleaning
Industrial systems do not wait for business hours. Our 24/7 dispatch handles emergency calls from Ogden plants running three shifts. If a duct collapse or contamination event shuts down a line, we mobilize overnight.
Emergency Air Duct Cleaning
When a rodent infestation in ductwork or a mold discovery forces an immediate shutdown, we respond same-day across Weber County. Emergency crews carry HEPA vacuums and sanitizing foggers to make the system safe for reoccupation.Ready when you are
Schedule Industrial Air Duct Cleaning in Ogden
We quote after a camera inspection, so you know exactly what is in your ductwork before you commit. NADCA-certified crews, after-hours scheduling, and a written report when we leave. Call (855) 927-7517 to book a walkthrough.
Talk with the local team
Request Industrial Air Duct Cleaning
We answer the phone from 8 a.m. to 6 p.m. Monday through Friday, and the line stays open around the clock for emergency duct calls. Most quotes take under ten minutes on the phone if you know your square footage and how many registers you have. If you would rather we come look, we will schedule a walkthrough at no charge.